CREATIVE CRAFTING

Archive for the ‘S&S Worldwide’ Category

This shadow box decoration is a wonderful holiday craft for the whole family.  It is easier than you might think and a wonderful keepsake.

Use small ornaments and Christmas figures to make a Christmas scene, with shifting snow, in a shadow box. This would be a nice activity to do with your children – let them play with the figures until they create a pleasing arrangement, then help them to glue everything in place.

You Will Need

• shadow box – at least 1½ inches deep (available at craft stores or dollar stores)
• assorted Christmas figures and small decorations
• optional: alphabet blocks
• strong craft glue or glue gun and glue sticks
• crystal snow or fine artificial snow

Project Instructions:

Remove the back of the shadow box and set aside.

Collect an assortment of Christmas figures and decorations and, working from the back, start to play with different arrangements until you create a Christmas scene that you like when seen from the front.

Begin gluing in the various pieces. If you’re using alpabet blocks, as we did, make sure they either sit firmly against the glass, or have enough clearance to prevent fake snow from getting trapped in front of them. Some possible short letter combinations for the alphabet blocks include NOEL, XMAS, SNOW, ANGEL or JOY.

Make sure all the pieces are glued in firmly; you don’t want them coming adrift after the shadow box is filled with snow and assembled. Let the glue dry.

There are some wonderful tools available for the Polymer Clay artist.   One of these that I have used quite extensively in my projects involving fairies is the flexible mold.

You can purchase them at your craft store.  There will be a wide variety of molds for you to use, everything from feet, emblems, leafs, flowers, hands, faces, even body molds.  These molds are made of a flexible rubberized material. However, I have learned there are some tricks to using these molds to your advantage.

First if you have never worked with Polymer Clay the first thing you should learn is to condition it.  That means take a small amount of clay off of the block and knead it with your fingers until it becomes very pliable.

Next pick the mold you would like to use and measure out the conditioned clay to approximate size of the shape you are trying to mold.  In the case of a face, pinch a very small end for the impression of the nose.  Press your clay into the mold.  Remove any excess clay around the impression.   You want the clay to be level with the mold do not want it to overlap on the outer mold surface.

To release the clay from the mold, gently rub clay off the edge of the mold toward the center of the molded piece.   This will give you a nice clean edge on your molded piece.  The mold is flexible so if you are careful you can release your piece by gently pressing opposite sides and your piece should release from the mold.